SKS-FILES FORUM

SKS Carbines => Unaltered SKS Rifles => General SKS Discussion => Topic started by: garyed057 on August 03, 2019, 04:45:55 PM

Title: Need help Rifle jamming
Post by: garyed057 on August 03, 2019, 04:45:55 PM
Hi

Went to the range today and the Rifle was jamming excessively. After getting home a disassembly revealed the short piston spring is shot. Where is the best place to get one?

thanks

Gary 
Title: Re: Need help Rifle jamming
Post by: Larry D. on August 03, 2019, 05:08:17 PM
Here you go, brother.
http://www.e-sarcoinc.com/skspistonreturnspringnew.aspx
The link is for a new spring. If I were buying a spring, that's the way I'd go.


What happened to the one you have?
Title: Re: Need help Rifle jamming
Post by: garyed057 on August 03, 2019, 09:12:29 PM
Thank you I just ordered one.

The old spring started unwinding at both ends

Gary
Title: Re: Need help Rifle jamming
Post by: Larry D. on August 05, 2019, 01:01:21 AM
Yuck!

Glad I could help.
Title: Re: Need help Rifle jamming
Post by: garyed057 on August 10, 2019, 01:32:05 PM
just fitted the new spring to the OP rod and I noticed something weird. the new spring is smaller diameter. Its as if years of use had caused the old spring to unravel and widen somehow

Gary
Title: Re: Need help Rifle jamming
Post by: Larry D. on August 10, 2019, 10:42:54 PM
How long have you had this one, Gary?
Title: Re: Need help Rifle jamming
Post by: garyed057 on August 10, 2019, 11:13:15 PM
I haven't had it three months yet. but according to the markings it is from the 70's

Gary
Title: Re: Need help Rifle jamming
Post by: Larry D. on August 11, 2019, 12:44:16 PM
Sounds like you have inherited someone else's problem.
The good thing is that SKS's  are hard to kill.

Start with the basics.

Does it jam every round?

Have you done a thorough disassembly and cleaning?

Start checking for bent, broken, and missing parts.
Title: Re: Need help Rifle jamming
Post by: garyed057 on August 11, 2019, 02:02:20 PM

It was jamming like every third or 4th round. I hadn't cleaned it completely after purchase so after the last range visit I pulled it apart and found the Gas tube gooped up with what I think was  Cosmoline plus the worn OP spring. All is cleaned up now and with the new spring should be good. range visit coming Tuesday I'll let you know

Gary