Now it looks complete!
(https://i.ibb.co/6nzyBhJ/IMG-1004.jpg)
(https://i.ibb.co/8zZDPg4/IMG-1008.jpg)
Gary
Nice. thumb1
Now, rotate it 180 degrees.
It's on upside down. ;)
Thanks friend
change made. I thought the flat side was supposed to be on the bottom when extended
Gary
Quote from: Boris Badinov on August 28, 2019, 06:17:27 PM
Nice. thumb1
Now, rotate it 180 degrees.
It's on upside down. ;)
Thats why the screw wouldn't lock in tight. after I rotated it the screw tightened down completely
thanks
Gary
Lookin' good! thumb1
nice work Gary, that does make it look complete. thumb1
Small problem came up though the collar that fits over the end of the barrel was too tight. but after 4 hours with a round file all is ok.
(https://i.ibb.co/8zZDPg4/IMG-1008.jpg)
Gary
Quote from: carls sks on August 29, 2019, 08:43:37 AM
nice work Gary, that does make it look complete. thumb1
Thank you for your service my friend. Proud to know you
Gary
Looking good.
Personally, I think that if there's a provision for a bayonet, then a bayonet is a must!
Excellent garyed057! Much better look for that nice Type 56! When I see an SKS without a bayonet or cleaning rod, it sets off all my OCD bells and whistles! Besplode :P (I don't actually have OCD, but I think I contracted a sympathetic case of it when I started frequenting these boards! lol !)Quote from: garyed057 on August 28, 2019, 06:43:59 PM
Thanks friend
change made. I thought the flat side was supposed to be on the bottom when extended
Gary
Flat side down when folded. That way, the shooter's hand doesn't feel the single edge of the bayo when gripping the forward handguard in firing position. More comfort with the flat side down, folded into the stock.
firstchoice
Quote from: firstchoice on August 30, 2019, 04:01:56 AM
Excellent garyed057! Much better look for that nice Type 56! When I see an SKS without a bayonet or cleaning rod, it sets off all my OCD bells and whistles! Besplode :P (I don't actually have OCD, but I think I contracted a sympathetic case of it when I started frequenting these boards! lol !)
Quote from: garyed057 on August 28, 2019, 06:43:59 PM
Thanks friend
change made. I thought the flat side was supposed to be on the bottom when extended
Gary
Flat side down when folded. That way, the shooter's hand doesn't feel the single edge of the bayo when gripping the forward handguard in firing position. More comfort with the flat side down, folded into the stock.
firstchoice
Thank you again FC. You helped make it possible. though I don't think I should try to bayonet the target at the indoor gun range!
Gary
Quote from: firstchoice on August 30, 2019, 04:01:56 AM
Excellent garyed057! Much better look for that nice Type 56! When I see an SKS without a bayonet or cleaning rod, it sets off all my OCD bells and whistles! Besplode :P (I don't actually have OCD, but I think I contracted a sympathetic case of it when I started frequenting these boards! lol !)
Quote from: garyed057 on August 28, 2019, 06:43:59 PM
Thanks friend
change made. I thought the flat side was supposed to be on the bottom when extended
Gary
Flat side down when folded. That way, the shooter's hand doesn't feel the single edge of the bayo when gripping the forward handguard in firing position. More comfort with the flat side down, folded into the stock.
firstchoice
I think I have the same condition when it comes to milsurps. My Nieces Husband bought a 98K Mauser and my first thought on seeing it was "Where's the cleaning rod?" Didn't say it out outloud.
Gary
A note on cleaning rods, Tickbite supply carries a few different ones. I ordered 2 Yugo rods hoping I'd get a couple of, at least, usable ones. What I received was 2 near mint rods. I'm gonna have to add some ugly to one of them to match the ugly Yugo.
I found Yugo slings at Victory for a good price, but they rape you on shipping.
As to bayonets, I've already said that they are a MUST for any rifle that has a spot for them. Same goes for slings, oilers, cleaning kits, etc.
I guess I'm in the OCD club, too........ thumb1